Modular Electronics,Citizen Electronics,Electronic Theory Blog - poitcomputers.com

Latest Tutorials

Lathe machine operation with a worker demonstrating proper technique

Demystifying the five major materials that make up OLED

1, anode material The anode material of the OLED is mainly used as the anode of the device, and the work function is required to be as high as possible in order to improve the injection efficiency of holes. OLED devices require that the electrodes must be transparent on one s

Read Tutorial
Lathe machine operation with a worker demonstrating proper technique

Circuit design of battery-powered LED lighting system

Boost circuit not only can boost, but also requires less components in the topology itself, which is beneficial to improve efficiency, and is very suitable for applications that need to supply batteries to LEDs. Analog dimming and digital dimming of LEDs were achieved through

Read Tutorial
Lathe machine operation with a worker demonstrating proper technique

Application of Frequency Sweep Generator in Digital Equipment

For the introduction of a successful digital technology, proper on-site investigation is the first thing to do. This investigation and its site preparation work should be completed before any digital front-end equipment arrives at the installation to avoid unnecessary delays during the insta

Read Tutorial
Lathe machine operation with a worker demonstrating proper technique

Large inventory of domestic full-color LED display problems

With the advancement of LED display technology and the continuous improvement of the performance of LED device materials, the application of full-color LED displays in the market is increasing. Whether walking on the streets or in shopping malls and supermarkets, full-color LED displays are everyw

Read Tutorial
Lathe machine operation with a worker demonstrating proper technique

Analysis of problems in LED driver power supply design

The quality of the LED driver power supply will directly affect the life of the LED , so how to do a good LED driver power is the top priority of LED power supply designers. This article will introduce some of the problems with LED driver power and hope to benefit design engineers.

Read Tutorial
Lathe machine operation with a worker demonstrating proper technique

Five tips to buy LED lights have to look

The first stroke, according to the season, the environment to choose the color temperature: color temperature range is 2700 ~ 6500K, the smaller the value is biased towards yellow light, otherwise the bias is toward blue and white light, yellow light is usually suitable for winter and bedroom, livi

Read Tutorial