April 16, 2024

What are the daily notebook maintenance

What are the daily notebook maintenance Once the computer has bought this thing, it must be distressed. If it is used in a locker for a few years, it will still be new, but it will also be backward because it will be updated too quickly. It is estimated that I bought a new one when I was not bad for three years and several years, and I usually pay more attention to maintenance during use.

If it is a newly purchased notebook, if you pay more attention to it during normal use, you can greatly extend the life of your notebook. The following points are important to note when using the notebook. Can look at it.

1. When using the battery, be careful not to remove the battery when using the AC power. It is not good for the machine to remove the battery. If the voltage or power in your area is not normal, and you are at work, suddenly One power off, the work you do is done outside the machine, the machine has no battery protection machine may also burn the motherboard, in order to protect the battery and remove the battery to use, and finally the machine motherboard burned out, a battery can use one to In two years, if you use a bad battery for a few hundred dollars, your machine will burn more than a few hundred dollars. If you use a machine that is almost scrapped and the battery is completely new, is it necessary? Don't scrap a million-dollar machine for a few hundred dollars.

2, notebook into the liquid laptop in the usual use of the most prone to failure is into the liquid, such as your machine in use unfortunately into the liquid, please press and hold the power switch immediately more than 3 seconds, forced shutdown, or directly remove the charge plug and Button battery. Then remove the detachable parts such as battery and optical drive.

3, charging note that the battery has a limit of the number of charge and discharge, the first three times when the charge is very important, we must try to put the power in the case of the machine is to shut down after their own charge, the first three charge, need a longer time Charging, generally should be charged continuously for 8 hours, and each time after the charge should be used as far as possible to run out of power, free charge and discharge will also affect its life, usually used when the battery discharge to about 10% can be charged, do not Do not recharge until 0%. Turn off the power for 2-3 hours under normal conditions. The battery can be fully charged after 4-5 hours boot. IBM's notebook will be charged under 95%, COMPAQ's notebook will be charged at about 90%, this design is to avoid repeated charge and discharge damage to the battery. Please perform a deep discharge within one month. When the discharge reaches 5% or so, turn off the machine and recharge the battery. Note--Do not leave the battery completely. Discharging the battery may cause the battery to be discarded. Normal use of the notebook does not require deliberate removal of the battery, if you do not use the notebook for a long time, please charge the battery to 50% storage.

4, the maintenance of the LCD screen The LCD screen is the most delicate parts of the laptop, the cost often also accounted for about 30% of the total cost of the notebook, so of course it must be placed first in the maintenance of it. The LCD screen should not be bumped. Do not draw on the screen or use your fingers to point at it. If there is a protective film on the screen, it is best not to tear off, so although not very good, but at least to ensure that the display can be away from dust, fingerprints and oil stains. In case something is dirty on the screen, you can try to wipe it with a dry cloth first. If it doesn't work, you can use a soft cotton cloth with some industrial alcohol or glass cleaner (never too much, once the liquid enters the screen ) Gently wipe. Of course, it's best to use a dedicated screen cleaner to achieve the best results. Finally, it is important to note that you do not press heavy objects on the screen. Many laptops now use a very strong magnesium alloy or even a titanium alloy. However, after all, laptops are not used as "backs"!

5, the maintenance of the hard disk Taking into account the laptop's hard drive movement problem, its seismic performance has been very good, but still should pay attention to not too much when moving, but can not knock, of course, it is best not to move the laptop in the boot state.

6, the maintenance of the optical drive, floppy drive laptop optical drive for volume considerations, done very thin. And the optical disks are generally stuck on the shaft, so try not to use inferior or irregular optical disks, which can easily damage the optical head. After a certain period of use, clean the optical head with a special CD cleaning sheet. The maintenance of the floppy drive is the same as that of the desktop computer. Do not use inferior or moldy platters. Use regular cleaning discs for regular cleaning.

7, mouse, keyboard maintenance Notebook mouse generally has three kinds: pointing stick, trackball and touchpad. The trackball is rare. It is equivalent to the ball of a mechanical mouse. When dirty, it can be removed and cleaned. The pointing stick is the easiest, if necessary, just replace a dedicated mouse cap. The touchpad is more troublesome. It is not possible to replace or repair it. Therefore, when using it, you must be careful not to use greasy hands to operate, and you must not use sharp objects to describe it on the surface if it has dirty surfaces. Things can be wiped clean with a soft cloth.

The maintenance of the laptop is to blend in with the usual bit by bit, such as switching on and off the LCD, to avoid damage to the cable; it is best to use a dedicated laptop bag when you go out and remember to take the zipper of the bag. Buttons are buckled; usually put it in a relatively clean place, not too cold, nor too hot; it is best to plug in and out of laptop peripherals in the case of power off. If you can treat your love machine well in peacetime, then it will certainly last longer.

Taihang Jiaxin lead-acid battery charging system is suitable for maintenance and non-maintenance operations. The primary function of the charging system is to provide continuous load while charging the battery without supervision. It is suitable for high reliability emergency backup power systems. Controlled by solid state thyristors with electronic sensing and monitoring. The charging characteristic is a constant potential with a current limit. The primary function of the charging system is to provide continuous load while charging the battery without supervision. The charger rectifier circuit provides 100% of the rated current, while the float/boost charges a group of lead acid batteries.

7Qq 2019011511190110

16143

Lead Acid Battery Charger

Lead Acid Battery Charger,Automatic Battery Charger,Intelligent Rapid Charger,12V Lead Acid Battery Charger

Xinxiang Taihang Jiaxin Electric Tech Co., Ltd , https://www.chargers.be