55 Inch Education Interactive Board 55 Inch Education Interactive Board,Conference All-In-One Machine,Conference Machine,Smart Conference Tablet Jiangsu Qilong Electronic Technology Co., Ltd. , https://www.qilongtouch.com
Method for making storage oscilloscope data U disk
An oscilloscope is a vital electronic instrument used to visualize and analyze the waveform of alternating current (AC) or pulsed signals. It typically consists of components such as a tube amplifier, a scanning oscillator, and a cathode ray tube (CRT). Beyond just displaying waveforms, an oscilloscope can measure parameters like frequency, voltage levels, and time intervals. Any periodic physical process that can be converted into an electrical signal can also be observed using this device.
This article will guide you through the process of creating a USB flash drive for storing oscilloscope data. This is especially useful if you're working with equipment that requires FAT32 formatting for compatibility.
**Steps to Create a Storage Oscilloscope Data USB Drive**
First, select a USB flash drive with a capacity under 4GB. It's best to use a reputable brand to ensure reliability. I personally chose a 2GB Kingston USB drive. Once you have it, plug it into your computer. As shown below:
Next, download a file system conversion tool. I used the Promise Partition Manager, but there are many similar programs available. You can find them by searching on Google or other trusted sources. Here’s what the interface looks like:
Once the software is open, check the current file system of your USB drive. In the red box, you’ll see that my drive is formatted as NTFS. Unfortunately, some oscilloscopes may not work properly with NTFS. Therefore, we need to convert it to FAT32. Click on the NTFS option and choose the FAT32 converter, as shown below:
After selecting the conversion option, a new window will appear. Choose your USB drive from the list and click "Next." Be careful not to select your computer's hard drive, as this could lead to data loss. The screen should look like this:
Once the conversion is complete, go to "My Computer" and check the properties of the USB drive. You should see that the file system has changed to FAT32, confirming the successful conversion. This makes the drive compatible with most oscilloscopes for data storage.
**Related Articles: Read Recommended >>>>>>>> How to Save the Data in the Oscilloscope into the U Disk**