Will you really buy the router? Choose not to speed faster

However, the pursuit and complaints of “speed” have not been stopped or even reduced.

“But obviously, if you handle 100M broadband, why does it always feel that the speed is unstable?

There are certainly many reasons that affect the speed of the Internet objectively. Today we mainly talk about the core equipment of home wireless network ---- router!

While our broadband has increased from a few megabytes to hundreds of megabytes, wireless routers are also faced with a large-scale update. This is a point that many users easily overlook.

Why Should You Replace a Router After Speed ​​Up?

Nowadays, more and more devices are needed in the home to use wireless networks, ranging from smart TVs to tablet phones. Each home wireless device has at least 5 or more accesses, and the future may only increase. In addition, ultra-high definition and 4K are now available. The popularity of VR, etc. has gradually become common. The old-fashioned routes of the low-order version cannot be supported at all.

[router purchase standard]

1.802.11ac wireless standard is a must

Since 2013, the 802.11ac wireless standard router products have entered the market and have become the mainstream in the market. However, for three years, it is now the second generation 11ac technology and supports the MU-MIMO architecture. (Routers can communicate with multiple devices at the same time. No interruptions are needed and channel congestion and interference problems are mitigated.

Among them, the attenuation in the 2.4G band propagation process is small, and the propagation distance is farther. However, the 2.4G band width is relatively narrow, and there are many devices using the 2.4G band. Therefore, the channel congestion and interference are large.

In contrast, the 5G signal frequency is high, but the attenuation of the propagation process is large, and the propagation distance is far less than 2.4G. Due to the wider 5G band, there is less signal interference, stable network speed, and support for higher wireless speeds.

It can be said that each has its advantages and disadvantages. Everyone can switch freely in different environments.

2. Gigabit wan

If the WAN port rate is too small, then no matter how high the external bandwidth is, it is still a 'small water pipe'. Therefore, for ordinary home users, it is necessary to have a Gigabit WAN port on the router.

Xiao Bian puts on an imprecise analogy. “Broadband Broadband is like thickening water pipes. The router is the faucet, and the faucet is only so big, so the water flow rate is slow. In order to have large flow and fast speed, you need to replace the faucet. ."

3. Router CPU

4. Antenna material and technology

How much, the pitch and the gain of the router antenna will directly affect the strength and coverage of the WIFI signal, so everyone in the selection of routers, try to choose a router device with multiple antennas and wide antenna spacing.

In addition, many manufacturers are in the 2.4G band, increase PA transmitter chip and LNA receiver chip, external FEM module in the 5G band, these will significantly increase the transmission performance, reduce signal interference, significantly increase Wi-Fi signal transmission distance And agility.

[With the least money, choose the most suitable router]

When choosing a router, it is necessary to consider comprehensively, what is your own needs, and not just to be greedy and beggars. If you choose a product that is cost-effective within a reasonable price range, you will not be wrong.

Computer Monitor

Guangzhou Bolei Electronic Technology Co., Ltd. , https://www.nzpal.com