Benefiting from the blessing of national energy conservation policies, the demand for LED light-emitting diodes continued to increase in 2011. Hexi Energy’s revenue target for this year is expected to be NT$500 million; if the second half of this year, Europe, North America, Asia and other countries The LED street lamp construction case passed the verification and the 2012 revenue can also be paid for the bright transcript. Lin Zhenfeng, general manager of Hexi Energy, said that although the LED street light standard in mainland China has not yet been finalized, there will still be a large number of orders for small shipments, which will be the source of revenue contribution from Hexi Energy. Lin Zhenfeng, general manager of Hexi Energy, revealed that thanks to the awareness of environmental protection, the LED streetlights in various countries have blossomed in 2011. At present, Hexi Energy has received a large number of LED street lamps in Eastern Europe, and has other orders for LED street lamps at home and abroad. As a result, Hexi Energy's production capacity is fully loaded in 2011, and the monthly production capacity can be maintained at an average of 4,000. This year's revenue is expected to reach NT$500 million. At this stage, He Xi Energy's domestic and foreign revenue contribution is half of the total, but with the promotion of energy-saving and carbon reduction policies in various countries, the proportion of foreign revenue contribution will increase significantly in the future. Lin Zhenfeng pointed out that this year, mainland China, North America, Germany, Spain, Eastern Europe, Japan, Malaysia, Vietnam, Brazil, Thailand and other LED street lighting manufacturers have purchased LED street lamp samples from the company for verification. Once successfully passed, they will be able to pay attention to 2012 revenue. contribution. It is noteworthy that despite the potential of the LED streetlight market in mainland China, the standard timing of LED streetlights in mainland China has been delayed for one year. In the absence of acceptance criteria, it is feared that the complexity of post-delivery payments is not easy to recycle. problem. Lin Zhenfeng said that the original LED street lamp standard in China is scheduled to be finalized in 2011, but the development is still unclear, and the risk of order is increased. Therefore, most LED street lamp manufacturers adopt a wait-and-see attitude. Compared with the scale of more than 6 million LED street lamps in mainland China, the Taiwan market is a small one. Therefore, even though Taiwan has taken the lead in formulating the LED street lamp standard CNS15233, mainland China is still targeting LED street lamps. The main market, so Hexi Energy has actively followed the local distributors to pay close attention to the standard trend of LED street lamps in mainland China. On the other hand, in view of the fact that local LED street lamp manufacturers in mainland China are more likely to obtain the standard case, He Xi Energy also intends to adopt a model of strategic alliance with local players to attack the LED street lamp layout in mainland China. Lin Zhenfeng does not say that there have been contacts between the mainland LED streetlight system companies and the company. If the future cooperation is a success, they will be able to combine their respective advantages to jointly win orders for LED street lamps in mainland China and further reach the market share in mainland China in 2012. He Xi’s overall revenue target of 20%. It is understood that the actual construction case of He Xi in Taiwan has reached 12,000, the use time is more than 5 years, and the failure rate is below 5/10,000, so it is favored by customers of LED street lamp in Eastern Europe. Hexi Energy mainly uses LEDs from Nichia and Cree.
1. In the cable laying process, it can support the cable and change the sliding friction into rolling friction between cable and support, which means it can reduce pulling force.
Cable Roller,Corner Roller,Hoop Rollers,Cable Guide Rollers NINGBO BEILUN TIAOYUE MACHINE CO., LTD. , https://www.spool-manufacturer.com
Edit: Leo
Features
2. Straight pulling roller is used in the straight line segment of cable laying. Generally put one roller every 2-3 meter.
3, Corner pulling roller is used in the turning point of cable laying. The amount of corner pulling roller in the turning point is determined by the side pressure and cable bending radius.
Usually used in laying path of cable tray, well head, upper and down slope and control cable.
Notes: When operating, the roller should be fixed in ground or other supports.
