A servo encoder slip ring is a specialized device that is used in conjunction with a servo motor to allow for the transfer of electrical power and signals between the motor and stationary components. The slip ring consists of a number of metal contacts that are arranged in a circular pattern, and it is typically mounted on the shaft of the motor. As the motor spins, the contacts within the slip ring make contact with corresponding contacts on the stationary components, allowing for the transfer of power and signals.
The primary benefit of using a servo encoder slip ring is that it prevents wear and tear on the electrical connectors that would otherwise be subjected to constant movement. Additionally, it can help to improve reliability and performance by providing a more consistent flow of power and signals.
It is specially developed for servo motor and servo motor encoder slip ring. It has the characteristics of small size, light weight, low power consumption, and long life. The inner diameter of the slip ring is only 10mm, which can be used in a small space. The service life of the slip ring is more than 100,000 hours, and the power consumption is only 0.5W.
A servo encoder slip ring is a device that allows an electrical current to pass between rotating and stationary parts of a machine. It does this by using a set of brush contacts that rotate with the shaft, while stationary contacts are mounted on the housing. This allows for uninterrupted power and data transmission in applications where the stationary component cannot be easily moved.
Oubaibo is a leading manufacturer and supplier of servo encoder slip rings. They produce high-quality products that are reliable and durable, and they specialize in slip ring 18 wire, and commutators. Their products are used in a variety of industries, including aerospace, defense, medical, and manufacturing.
Servo Encoder Slip Ring,Slip Ring Korea,Slip Ring 18 Wire,Commutator With Slip Ring Dongguan Oubaibo Technology Co., Ltd. , https://www.sliprobs.com
*Low price and high reliablity
*105ºC Ootput capacitor
*AC input power suitable for the world
*High efficiency and low operation tenperature
*Sofft-start current can reduce the AC input impact effecticly
*With short-circuit and overload protectio
*Compact size,light weight
*100%full-load bum-in test
*Installed with EMI filter, mlnlmum wave
Specification         ModelNo.
    S-201-5
    S-201-12
   S-201-24
   S-201-48
DC output voltage
5V
12V
  24V
48V
Output voltage range (Note:2)
 ±2%
 ±1%
  ±1%
 ±1%
Rated output current
40A
16.5A
8.3A
4.2A
 output  current range
   0~40A
0~16.5A
0~8.3A
0~4.2A
Wave and noise (Note:3)
75mVp-p
75mVp-p
75mVp-p
75mVp-p
Inlet stability (Note:4)
     ±0.5%
     ±0.5%
     ±0.5%
 ±0.5%
Load stability (Note:5)
     ±0.1%
     ±0.5%
     ±0.5%
  ±0.5%
DC output power
201W
201W
201W
201W
Efficiency
 78%
83%
83%
 84%
Adjustable range for DC voltage Â
4.5~5.6V
10~13.2V
20~26.4V
41~56V
AC input voltage rangeÂ
 90-132VAC/ 180~264VAC  47~63Hz 254~370VDC
output current
3.6A/115VÂ 1.8A/230
AC rush current
25A/115VÂ 50A/230V
Leakage current
<3.5mA/240VAC
Overload protection        Â
 105%-150% hiccup mode,auto-recovery
Over-Voltage protection   Â
5.75~6.75V/Â 13.8~16.2V/18~21V/33.7~39.2V
High-temperature protection
ERH3≥65ºC 70ºC Cfan  on,≤55ºC~60ºCCfan off,>80ºC~85ºC,
Cut off output(5~15V)~(24~48V)
Temperaut re cofficient
 ±0.03%/ºC(0~50ºC)
Setup,rise,hold up time
 200ms,100ms,20ms
Vibration
 10~500Hz, 2G 10min,1 cycle Pariod for 60min, Each axes
Withstand voltage Â
 I/P-O/P:1.5Kv    I/P-FG:1.5KV   O/P-FG:0.5KV   1minute
Insulation resistanceÂ
 I/P-O/P   IP/FG   OP-FG:500VDC/100MΩ Â
Working temperature and humidity
 -10ºC~+60ºC,20%~90%RH
Overall dimension
 215*115*50 mm
Safety Standards
Design refer to UL1950
EMCÂ StandardsÂ
Design refer to FCC Part15J Class A
Weight
0.9Kgs
Note:
1.The testina condition for The Paramenter is:230VAC input,rated load, 25ºC 70% RH Temperature
2.Error incude the seting error, line stability and load stability
3.Wave test:adopt in "A12"double wire for 20MHz,and 0.1 UF capacitor short-circuit for interrupt bugÂ
4.Inlet voItage stability test:When is over load,the lowest voItage of inlet is up to the hiqhest voltaqe
5.Load stability test:the load is from 0% to 100%
6.C3,4 must be knocked dow
*Low price and high reliablity
*105ºC Ootput capacitor
*AC input power suitable for the world
*High efficiency and low operation tenperature
*Sofft-start current can reduce the AC input impact effecticly
*With short-circuit and overload protectio
*Compact size,light weight
*100%full-load bum-in test
*Installed with EMI filter, mlnlmum wave
Specification         ModelNo.
    S-201-5
    S-201-12
   S-201-24
   S-201-48
DC output voltage
5V
12V
  24V
48V
Output voltage range (Note:2)
 ±2%
 ±1%
  ±1%
 ±1%
Rated output current
40A
16.5A
8.3A
4.2A
 output  current range
   0~40A
0~16.5A
0~8.3A
0~4.2A
Wave and noise (Note:3)
75mVp-p
75mVp-p
75mVp-p
75mVp-p
Inlet stability (Note:4)
     ±0.5%
     ±0.5%
     ±0.5%
 ±0.5%
Load stability (Note:5)
     ±0.1%
     ±0.5%
     ±0.5%
  ±0.5%
DC output power
201W
201W
201W
201W
Efficiency
 78%
83%
83%
 84%
Adjustable range for DC voltage Â
4.5~5.6V
10~13.2V
20~26.4V
41~56V
AC input voltage rangeÂ
 90-132VAC/ 180~264VAC  47~63Hz 254~370VDC
output current
3.6A/115VÂ 1.8A/230
AC rush current
25A/115VÂ 50A/230V
Leakage current
<3.5mA/240VAC
Overload protection        Â
 105%-150% hiccup mode,auto-recovery
Over-Voltage protection   Â
5.75~6.75V/Â 13.8~16.2V/18~21V/33.7~39.2V
High-temperature protection
ERH3≥65ºC 70ºC Cfan  on,≤55ºC~60ºCCfan off,>80ºC~85ºC,
Cut off output(5~15V)~(24~48V)
Temperaut re cofficient
 ±0.03%/ºC(0~50ºC)
Setup,rise,hold up time
 200ms,100ms,20ms
Vibration
 10~500Hz, 2G 10min,1 cycle Pariod for 60min, Each axes
Withstand voltage Â
 I/P-O/P:1.5Kv    I/P-FG:1.5KV   O/P-FG:0.5KV   1minute
Insulation resistanceÂ
 I/P-O/P   IP/FG   OP-FG:500VDC/100MΩ Â
Working temperature and humidity
 -10ºC~+60ºC,20%~90%RH
Overall dimension
 215*115*50 mm
Safety Standards
Design refer to UL1950
EMCÂ StandardsÂ
Design refer to FCC Part15J Class A
Weight
0.9Kgs
Note:
1.The testina condition for The Paramenter is:230VAC input,rated load, 25ºC 70% RH Temperature
2.Error incude the seting error, line stability and load stability
3.Wave test:adopt in "A12"double wire for 20MHz,and 0.1 UF capacitor short-circuit for interrupt bugÂ
4.Inlet voItage stability test:When is over load,the lowest voItage of inlet is up to the hiqhest voltaqe
5.Load stability test:the load is from 0% to 100%
6.C3,4 must be knocked dow
Low, Medium & High Supply Power Constant Current Power Supplies
Model NO.: S-201-48V
Voltage Regulating Mode: Frequency Modulation Type
Power Supplying System: Terminal Power Distribution Equipment
Energy Transmission: One-way Transmission
Modulation System: PWM
Certification: CE, RoHS, ISO, CCC, CB
Brand: Mwish
Trademark: MWISH
Transport Package: Export Package
Specification: 215*115*50 20PCS/CTN
Origin: China
HS Code: 8504401990
Model NO.: S-201-48V
Voltage Regulating Mode: Frequency Modulation Type
Power Supplying System: Terminal Power Distribution Equipment
Energy Transmission: One-way Transmission
Modulation System: PWM
Certification: CE, RoHS, ISO, CCC, CB
Brand: Mwish
Trademark: MWISH
Transport Package: Export Package
Specification: 215*115*50 20PCS/CTN
Origin: China
HS Code: 8504401990