The so-called intelligent lighting control system is actually based on the function of a certain area, different time of day, outdoor light brightness or the use of the area to control lighting. One of the most important things in the industry is the ability to preset, which has the ability to turn the brightness of the illumination into a series of settings. These settings, also known as scenes, can be called automatically by the dimmer system or the central building control system. When used in the home, it can be in the form of an integrated central controller and may have a touch screen interface. In fact, this system replaces the complete Building Management System (BMS), which is used in a commercial environment. The intelligent lighting system is the basic part of the entire smart home, especially suitable for large-scale housing, it will make life convenient and comfortable. The lighting control system is divided into a stand-alone, room-specific or large-scale networking system. In a networked system, the dimming device is installed in an electrical cabinet and operated by a network of external devices such as sensors and control panels. The advantage of a networked system is that it can control different areas of the room from many points. In the home, a control panel can be installed on the wall near the main entrance as the main control point for multiple exterior rooms. Network switches and wireless remote control systems are an important component of intelligent lighting systems. There are two series of network switches: T-type and R-type; wireless remote control system includes two types of products: remote control and receiver. It is a smart product because it has built-in computer chips and software, and it has complicated functions. It is also a fool product, because they look like ordinary switches, and the installation method and basic operation are similar to ordinary switches. The network switch is a revolution of the switch. The network switch has powerful home network control function, but it has no complicated control cable, and its wiring, installation and use are simpler than the traditional switch. Switches, electrical appliances, telephones, remote controls, etc. are all nodes in the network. This network is nothing else, it is a 220V cable at home, it is a ready-made network. RL-X10 power carrier networked intelligent home control. Looks like ordinary network switch, built-in mystery, it makes control everywhere, any point can control the whole network, the whole network can also control any point, can control in two places The whole family of lights and appliances can also control a certain lamp and electrical appliance at any position in the whole house; with a remote control, it can remotely control all the lights and appliances in the home. The network switch allows you to define each of its keys at will. You can switch all the lights, a set of lights, a light or an appliance with a single button. For example, if this button controls a certain light, now you can let her control a certain curtain, of course you can let it control the lights and curtains at the same time. Even in a renovated home, the network switch can directly replace the ordinary switch. She has an elegant appearance, a built-in computer chip and software, and a variety of remote controls. Ordinary families can be owned around 2,000 yuan. Smart homes start with switches, and network switches will improve people's lives. It is the perfect combination of high technology and home. At present, the company has developed a variety of interface units (RS232, Ethernet, etc.) and powerful interface programs, any system or software can be easily integrated with the C-Bus system. The system can not only maintain and manage locally, but also remotely maintain it via LAN or even the Internet. Therefore, using the C-Bus system will make it easier to install, faster, more flexible, and more convenient to manage. Because the C-Bus system uses infrared sensors, brightness sensors, time switches and dimming technology, the intelligent operation mode enables the entire lighting system to operate accurately according to the cost-effective and optimal solution, not only greatly reducing the operation management. Cost, and maximum energy savings, can save 20-30% of energy compared to traditional lighting control methods. C-Bus also uses soft-start and soft-shutdown technology to enable each load loop to start, shut down, or start and shut down for a short period of time (usually tens to hundreds of milliseconds) to avoid impact. The damage of the voltage to the luminaire doubles the life of the luminaire. At the same time, the C-Bus system is open and provides interfaces and software protocols for connecting to BA systems (including closed-circuit monitoring, fire alarms, and security systems) to facilitate a perfect building automation system. Buildings that use the BA system, if they also use the C-Bus intelligent lighting management system, will improve the building's intelligent procedures, increase the highlights of the property, and increase the sale and occupancy rate of the building, which undoubtedly gained many potential income. YS-L20A This intelligent lighting power-saving monitoring system is a high-tech lighting power-saving technology introduced from the United States. It adopts high-tech materials and unique design. By smoothly adjusting the voltage and current amplitude of the lighting circuit, it can effectively reduce the power consumption of the lighting system and the three-phase lighting power-saving monitor using digital technology to realize the micro-monitoring and control. Its advanced microprocessor and unique software design can continuously monitor and modulate the sine wave of communication, which can effectively save electricity. It represents the most advanced lighting power-saving control technology in the world, and it is an extremely high-quality lighting and power-saving product.