March 29, 2024

AMOLED industry status: the market gradually warms up Samsung's exclusive production capacity

The AMOLED market seems to be showing signs of increasing temperature. According to reports, the market size of AMOLED for small and medium-sized screens in 2009 was about 21.8 billion US dollars, and it is expected to reach 23.8 billion US dollars this year.

DigiTimes estimates that shipments of consumer electronics will double in 2010, so if the overall market growth is also estimated, the market size of small and medium-sized AMOLED screens will exceed $50 billion.

Experts pointed out that the main bottleneck of AMOLED mass production is the lack of capacity, which also causes downstream mobile phone manufacturers to adopt AMOLED in their products due to worry about supply problems. However, the shortage of production capacity is expected to increase in the AMOLED market in 2012 after more manufacturers (about 5 to 6) have joined the mass production line in 2011.

It is understood that the initial development of the AMOLED industry will be based on small and medium size applications. In addition to the different luminescent materials, and AMOLED does not require a backlight module, basically AMOLED and LCD have many similarities in structure and parts. Therefore, the current LCD manufacturers in the LCD industry chain, the threshold for the transformation of AMOLED is not high. The key to the transformation of LCD panel factory into AMOLED field is to master the process technology of LTPS (low temperature polysilicon). Due to the technical difficulties of LTPS and vacuum thermal evaporation processes, AMOLEDs were mainly used in the display of small and medium-sized mobile devices in the early stage of development.

Experts believe that the depreciation and amortization period of the AMOLED production line is longer, and the production capacity is longer than the LCD. This kind of characteristic makes the key to the final success of the AMOLED battle, which will be determined by the manufacturer who first invested in the AMOLED production line and mastered the LTPS process technology. In the hands. At present, only Samsung Electronics has the ability to mass production in the AMOLED industry. As for LG, AUO and Chi Mei, manufacturers are actively preparing production lines. It is expected that mass production will be available at the end of this year or next year. Therefore, Samsung is currently far ahead of other competitors in the AMOLED field.

3D printing on the pen machine is mainly used in 3 d printing pen, is made from a special custom Dc Gear Motor, mainly used in 3 d printing pen, pen 3 d printing machine has been updated three generations according to the requirements of product.


3D Printing Motor product introduction:

The 3D Printing Motor is based on the deceleration Motor, coupled with supporting gears and ball bearings.The role of the gear reducer is to provide lower speed and greater torque.At the same time, gear box different deceleration ratio can provide different speed and torque.It's mostly rolling.

3D Printing Motor

     3D Printing Motor3D Printing Motor




Features: 3D Printing Motor, small size, large torque, low noise, durable, low energy consumption, customized power design, convenient installation and maintenance;

Simplify design and save space.


Features: usually used financial equipment, office equipment, electronic locks, wireless charger, remote control toys, precision instruments and meters, automobile industry, medical equipment, consumer electronics, household appliances, electric glass doors and Windows, etc., wide application range


Method of use: the best stable in horizontal plane, installed on the 3D Printing Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the 3D Printing Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

3D Printing   3D Printing



Operating temperature range:

3D Printing Motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a 3D Printing Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

3D Printing Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of 3D Printing Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.

3D Printing Motor

3D Printing Motor

3D Printing Motor,3D Printing Gear Motor,3D Printing Pen Motor,3D Printing Spindle Motor

Shenzhen Shunchang Motor Co., LTD. , http://www.scgearmotor.com