Babbitt Wire is with tin as the base, the product is added with certain amount of antimony, copper
or other improved elements.
Sn Sb7Cu3 Babbit metal is suitable for metal spraying on the end face of metalized ï¬lm capacitor. With strong adhesive force, good weldability and low loss angle, it is an ideal metal spraying material for laminated capacitor.
Other trade marks are suitable to use CMT, TIG and MIG technology to manufacture sliding bearing bush material layer. It is of high bonding strength with substrate, with material utilization rate of 70~80%. It has small amount of ingredient segregation without any loose or slag inclusion. The internal control standard of the alloy composition is prevailing over GB/T8740-2013. Babbi1 metal added with improved elements can substantially enhance the service life.
Snsbcu Babbitt Wire,Overlaying Materials,Thermal Spray Babbitt Wire,Babbitt Wire Shaoxing Tianlong Tin Materials Co.,Ltd. , https://www.tianlongspray.com
According to statistics from the Kunshan Inspection and Quarantine Bureau, in July this year, the export of Kunshan lamps and lanterns was US$17.47 million, an increase of 36.81% year-on-year. The cumulative export volume this year was US$103.02 million, an increase of 21.09% year-on-year. It is understood that Kunshan lighting companies continue to increase the proportion of exports of LED lamps, profits are about 30% higher than traditional lamps, so in the current context of the foreign trade environment is unfavorable, it still achieved a contrarian growth.
In view of the increasing maturity of LED lighting technology, in recent years, developed countries such as the United States, Japan, and the European Union have successively formulated relevant standards to regulate the requirements for the safety, performance and energy efficiency of LED products.
It is worth noting that the upcoming September 1st, the latest energy efficiency requirements of the EU LED lighting products will begin implementation. The EU is the region with the highest import requirements for LED products. LED products entering the EU market must meet the safety requirements in the Low Voltage Directive, the electromagnetic compatibility requirements in the EMC Directive, the environmental requirements in the RoHS and WEEE Directives, and the energy efficiency requirements in the ErP Directive. In addition, LED products also need to comply with the conformity assessment procedures stipulated in the corresponding regulations. Only in this way can the CE mark be affixed to enter the EU market smoothly.
According to the ErP Directive, the European Union has developed energy efficiency requirements for different lamps in phases. In 2009, it launched EC244/2009 for non-directional light sources (mainly halogen lamps, fluorescent energy-saving lamps), for fluorescent lamps, ballasts, and accordingly In December 2012, the EU1194/2012 for all LED light bulbs and directional light sources was again launched in December 2012. This directive will take effect on September 1, 2013, and will be implemented in three phases. Next, the second phase of implementation of this requirement will be September 1, 2014, and the third phase will be September 1, 2016. number.