Electric Vehicle Wiring Harness
The electric vehicle wiring harness is the blood vessel of the electric bicycle. Through this blood vessel, the power of the battery is output to the motor, control system, lighting signal system, and auxiliary system to drive and control the vehicle. The carrier of this blood vessel is the electric vehicle wiring harness. Electric vehicle wiring harnesses are divided into main wiring harnesses and branch wiring harnesses, which should be classified according to the system configuration of electric vehicles. The main wiring harness is divided into battery power supply system wiring harness, power switch wiring harness, control system main supply wiring harness; branch wiring harness is divided into lighting signal wiring harness, control system signal wiring harness, combination switch wiring harness, etc. The wiring harness of the lighting signal system can be divided into headlights, front turn signals, rear lights, rear turn signals, brake lights, license plate light harnesses, etc. Plastic connectors are generally used between the wiring harness and the wiring harness and between the wiring harness and the electronic components. Generally, manufacturers use different numbers of holes in connectors to distinguish them. Most of the main circuit harnesses of the whole vehicle are centered on the controller and extend to the front and rear of the vehicle body respectively.
As the main carrier of power output on electric vehicles, FAKRA Wiring Harness is one of the key components for the performance and safety of the entire vehicle. The requirements of electric vehicle high-voltage wiring harnesses, voltage, current, temperature, and working life , Shielding effect, flexibility, bending resistance, identification, etc. All of them are indispensable. Its wires, terminals, connectors, and other raw materials must meet environmental standards for use in order to ensure the safety of electric vehicles.
Electric Vehicle Wire Harness,Electric Vehicle Wiring Harnesses,Electric Vehicle Wiring Harness,Power Wire Harness Kable-X Technology (Suzhou) Co., Ltd , https://www.kable-x-tech.com
Jingdian (2448) received an LED test order for cancer treatment in the United States, which is expected to be shipped in large quantities after passing the US Food and Drug Administration (FDA) inspection!
Jingsheng spokesperson Zhang Shixian confirmed that there have been orders for LED samples with a red wavelength of 660 recently, mainly for the treatment of cancer, which has been certified. Because it is a one-time application, the gross profit margin is quite high, and Crystal Power is expected to open this niche market.
Since the order is full, Crystal has begun to select orders. Orders with high gross profit margins give priority to the growth rate of Jingdian's gross profit margin by 5-6 percentage points quarter by quarter. The gross profit margin of Jingdian is from 22% in Q2 in 2009 to 27.6% in Q3, and Q3 is up to 33.3. %, the current gross profit margin in a single month has exceeded 35%, and the legal person estimates that the Q1 gross margin of Jingdian has a chance to approach 40%. Due to the continuous expansion of the economic scale of Jingdian and the good product mix, the net profit per share (EPS) of Jingdian Q4 in 2009 was NT$1.41. The profit of Q1 in 2010 will be better than that of Q4 in 2009. It has begun to upgrade the EPS of 2009, which is adjusted from 4 yuan to 6 yuan. 
Kable-X has more than 20 years of experience With experience in the Cable Assembly, the quality of Kable-X electronic wiring harness has passed ISO9001, IATF16949, IPC620C and other certifications, and the products are exported to Japan, South Korea, the United States and other countries. Provide customers with one-stop service for automotive high-voltage wiring harness customization.
Therefore, our Vehicle Cable Assembly is recognized by our customers, and we can meet customer needs. Especially our Agricultural Machinery Navigation Wire Harness and Vehicle Air Conditioner Wire Harness.
